Search found 590 matches

by mooreken
Tue Mar 26, 2024 12:29 am
Forum: Events
Topic: North Florida Cobra Lunch - Sunday April 7th
Replies: 3
Views: 25

Re: North Florida Cobra Lunch - Sunday April 7th

Weather being good should be a good test with the EFI.
by mooreken
Mon Mar 25, 2024 10:07 pm
Forum: Cobra stuff
Topic: 4-Link Heim joint upgrade
Replies: 1
Views: 14

4-Link Heim joint upgrade

As I describe in the video, I had changed some slightly worn Heim joints for some pricey urethane/silicon non squeaky joints. It didn't work out as I planned.

Enjoy the video of the upgrade.

https://youtu.be/IRUDc1_C6Qc
by mooreken
Sat Mar 16, 2024 4:44 pm
Forum: Cobra stuff
Topic: Fuel injection upgrade
Replies: 22
Views: 5446

Re: Fuel injection upgrade

Just a follow up. One of the main reasons I went to the EFI was the way uneven fuel distribution. After an interstate run I checked a few plugs and they looked much better. Timing burn marks on the electrode also look good. The AFR readings look a little lean but I’ll wait for more miles to see how ...
by mooreken
Fri Mar 15, 2024 8:35 pm
Forum: Cobra stuff
Topic: Fuel injection upgrade
Replies: 22
Views: 5446

Re: Fuel injection upgrade

Today was a good day. I finished the throttle linkage and steering column.

SO TEST DRIVE :clap: :dance:

https://youtu.be/VBaNfBnwCPg
by mooreken
Wed Mar 13, 2024 11:09 pm
Forum: Cobra stuff
Topic: Mike's GT40 gets redone
Replies: 79
Views: 212998

Re: Mike's GT40 gets redone

Nice...but I do have one thing to add.....It's not PO. Its DPO. "Dreaded Previous Owner" :oldmoon:
by mooreken
Tue Mar 12, 2024 6:30 pm
Forum: Cobra stuff
Topic: Fuel injection upgrade
Replies: 22
Views: 5446

Re: Fuel injection upgrade

W.W. Grainger came thru on time and with the correct part. In fact it is exactly the same part. :dance: IMG_2854.jpeg I got it installed and tested. Glad to check that off the list. IMG_2855.jpeg I put the fuel pressure gauge at the throttle body inlet port and the needle shook so bad I couldn’t eve...
by mooreken
Mon Mar 11, 2024 10:38 pm
Forum: Cobra stuff
Topic: Fuel injection upgrade
Replies: 22
Views: 5446

Re: Fuel injection upgrade

As I mentioned in the video, the Ft pusher fans were not working and I assumed that I had messed up the wiring or something. But I could not find anything wrong around the relay wiring. So I pulled the fuse and it had come corrosion on the pins and cleaned that up. Then I made a jumper wire to bypas...
by mooreken
Mon Mar 11, 2024 10:38 pm
Forum: Cobra stuff
Topic: Fuel injection upgrade
Replies: 22
Views: 5446

Re: Fuel injection upgrade

As I mentioned in the video, the Ft pusher fans were not working and I assumed that I had messed up the wiring or something. But I could not find anything wrong around the relay wiring. So I pulled the fuse and it had come corrosion on the pins and cleaned that up. Then I made a jumper wire to bypas...
by mooreken
Sat Mar 09, 2024 4:38 pm
Forum: Cobra stuff
Topic: Fuel injection upgrade
Replies: 22
Views: 5446

Re: Fuel injection upgrade

I knew it had been a while since I ordered the Sniper kit. Invoice shows January 29, 2023. Time flies whether you have fun or not... :lol: :dance: The video says it all...but the start up was not clean. However I think it was normal. Its just that no YouTube or Holley videos show how things run befo...