FirstCoastCobraClub

Here are the pictures

It all looks clean and rust free, should look great when it’s done!

Yep, looks like you have good "bones" to work with.
The only advise I would give is to work with one or two sections of the project at a time and finish that section..It help to mentally keep from being overwhelmed. When you stand back after a while and look at it you tend to only see the finished part and it keeps the juices flowing...
Ken

BlackSnake wrote: Mon Nov 18, 2024 11:32 am It all looks clean and rust free, should look great when it’s done!

Under the battery tray and the shock towers need repair but other than that the only welding we are gonna do is adding bracing and Jack Points!
Did some scraping of old undercoating and grease to get ready for sanding

mooreken wrote: Mon Nov 18, 2024 10:30 pm Yep, looks like you have good "bones" to work with.
The only advise I would give is to work with one or two sections of the project at a time and finish that section..It help to mentally keep from being overwhelmed. When you stand back after a while and look at it you tend to only see the finished part and it keeps the juices flowing...
Ken

Yes That is very good advice we have chosen to start with the engine bay and front inner fenders and work our way back!

Since my last post I have brought the fenders, hood, trunk, and doors to the turkey rod run where the guy that does the chemical stripping is taking them to Wauchula should be getting them back after Christmas. My Export brace and under engine brace have arrived so that will get fitted soon! Here are pictures from Sebring that I took for inspiration for the upcoming subframe connector project and another picture of the mustang at Daytona for the front Jacking point.

Also at Sebring Curt and Ralph of Cobra automotive hooked me up with some front Disc Brakes for the falcon!

Nice calipers!

Thanks Tom!

Happy New year everyone! Spent New Year’s Eve pulling the remaining wiring out of the dash getting ready to strip the car and start chassis work!