Oil Leak follow up
Posted: Mon Feb 15, 2016 1:50 pm
Well its been cold add rainy so the board has been quite. Here are some pictures of how my engine reinstall came out.
While cleaning the engine bay while the motor was out I found Heat Damage to the foot boxes. I used Lizard Skin heat undercoat but I painted over the top. The undercoat did its job but the paint gave up. I added heat shield from Summit Racing.
Here is the old breather system. Looks cool but it leaked, even with baffles and a air filter pre breather sponge that I took from my Lawnmower's air cleaner stuffed in. Here is the air breather that I wanted to use....it is just barely too Tall. I shortened up everything that I could and it just still needs another 5/16 shorter" This is where I ended up.
Old air cleaner, new valve covers with PVC system connected and Headers re-coated with ceramic.
I also moved my vacuum advance from ported to manifold vacuum. This fixed a LOT of problems. My plugs always looked rich. Even when I knew that I had it jetted too lean. Once I changed the vacuum the plugs got real white right away. I raised the jets 5 steps and all sorts of drivability issues went away. The manifold vacuum increased the idle advance around 15 degrees. Max advance stayed the same when accelerating.
Well that's all for now.....Just wanted to share my "Garage Time".
Ken
While cleaning the engine bay while the motor was out I found Heat Damage to the foot boxes. I used Lizard Skin heat undercoat but I painted over the top. The undercoat did its job but the paint gave up. I added heat shield from Summit Racing.
Here is the old breather system. Looks cool but it leaked, even with baffles and a air filter pre breather sponge that I took from my Lawnmower's air cleaner stuffed in. Here is the air breather that I wanted to use....it is just barely too Tall. I shortened up everything that I could and it just still needs another 5/16 shorter" This is where I ended up.
Old air cleaner, new valve covers with PVC system connected and Headers re-coated with ceramic.
I also moved my vacuum advance from ported to manifold vacuum. This fixed a LOT of problems. My plugs always looked rich. Even when I knew that I had it jetted too lean. Once I changed the vacuum the plugs got real white right away. I raised the jets 5 steps and all sorts of drivability issues went away. The manifold vacuum increased the idle advance around 15 degrees. Max advance stayed the same when accelerating.
Well that's all for now.....Just wanted to share my "Garage Time".
Ken