1968 Triumph TR250 restoration

[mooreken]

Yes,,,I used to get upset when I was told "I've forgotten more than you know" by the old geezers I worked with....I can now understand what they were talking about....

[mooreken]

It’s been a while that I posted an update on the Triumph.
My brother and I have been working on it but the slow and careful process of final assembly doesn’t make good video.
However we have made progress. Today we threw in a seat and finalized the systems to do the first around the block test drive.

https://youtu.be/aVE5qmaoEus?si=RVkpU9MykvZbFyIJ

[Tom Wells]

Ken,

Looking really good! You guys do good stuff.

As to the speedometer, well, it's British, yes?

Tom

[BlackSnake]

Any kind of progress is always a good thing…I speak from experience…

[mooreken]

We painted the nose stripe onto the Triumph this weekend.

https://youtu.be/-Ss6XsNDToc

Ken

[mooreken]

A short video of where I’m at with the Triumph. Courtesy of my brother.

https://youtu.be/4LkSRu4R77c?si=xXRLJW-kqJQY4_2b

[BlackSnake]

It’s looking real nice Ken!

[mooreken]

This is a very short video from my brother on the Triumph....Nearly done.

https://youtu.be/3FieF4q7Ggc?si=FeZ93NzFEkulwwdO

[mooreken]

I thought I had posted this but i did not.
Here is a really short video of the completed convertible top install....
Next session we should finish up carpet and seats to finish the reconstruction. Only a final buff and polish and a few miles to debug things... (one of the ft calipers has sprung a leak)

https://youtu.be/Hooww6Eelx8?si=fRQ2y8akSCiX1CqS