Page 11 of 11
Re: 1968 Triumph TR250 restoration
Posted: Sun Jan 07, 2024 8:50 pm
by mooreken
Yes,,,I used to get upset when I was told "I've forgotten more than you know" by the old geezers I worked with....I can now understand what they were talking about....
Re: 1968 Triumph TR250 restoration
Posted: Sat May 25, 2024 7:08 pm
by mooreken
It’s been a while that I posted an update on the Triumph.
My brother and I have been working on it but the slow and careful process of final assembly doesn’t make good video.
However we have made progress. Today we threw in a seat and finalized the systems to do the first around the block test drive.
https://youtu.be/aVE5qmaoEus?si=RVkpU9MykvZbFyIJ
Re: 1968 Triumph TR250 restoration
Posted: Sat May 25, 2024 8:54 pm
by Tom Wells
Ken,
Looking really good! You guys do good stuff.
As to the speedometer, well, it's British, yes?
Tom
Re: 1968 Triumph TR250 restoration
Posted: Mon May 27, 2024 5:18 pm
by BlackSnake
Any kind of progress is always a good thing…I speak from experience…
Re: 1968 Triumph TR250 restoration
Posted: Mon Jun 10, 2024 2:27 pm
by mooreken
We painted the nose stripe onto the Triumph this weekend.
https://youtu.be/-Ss6XsNDToc
Ken
Re: 1968 Triumph TR250 restoration
Posted: Sun Jul 28, 2024 1:48 pm
by mooreken
A short video of where I’m at with the Triumph. Courtesy of my brother.
https://youtu.be/4LkSRu4R77c?si=xXRLJW-kqJQY4_2b
Re: 1968 Triumph TR250 restoration
Posted: Wed Jul 31, 2024 7:16 am
by BlackSnake
It’s looking real nice Ken!
Re: 1968 Triumph TR250 restoration
Posted: Fri Nov 08, 2024 12:45 pm
by mooreken
This is a very short video from my brother on the Triumph....Nearly done.
https://youtu.be/3FieF4q7Ggc?si=FeZ93NzFEkulwwdO
Re: 1968 Triumph TR250 restoration
Posted: Fri Nov 22, 2024 11:05 pm
by mooreken
I thought I had posted this but i did not.
Here is a really short video of the completed convertible top install....
Next session we should finish up carpet and seats to finish the reconstruction. Only a final buff and polish and a few miles to debug things... (one of the ft calipers has sprung a leak)
https://youtu.be/Hooww6Eelx8?si=fRQ2y8akSCiX1CqS